Description
EMW3162 is a low-power embedded Wi-Fi module integrates a wireless LAN MAC/baseband /radio, and a Cortex-M3 microcontroller STM32F205 that runs a unique "self-hosted" Wi-Fi networking library and software application stack. EMW3162 has 1M bytes flash, 128k RAM and rich peripherals for your embedded Wi-Fi applications. EMW3162 is also an mxchipWNetTM compatible platform, users can build their own embedded Wi-Fi applications based on mxchipWNetTM library which manage all of the Wi-Fi MAC and TCP/IP stack processing. We also provide several mxchipWNetTM firmware to meet typical applications: wireless UART, wireless audio, wireless sensor etc. When using mxchipWNetTM-DTU firmware, you can establish Wi-Fi networking for any device with a micro-controller and a serial interface. Quick development cycles enables fast time to market. EMW3162 and EMW3280 are pin compatible.
Features
- Single operating voltage: 3.3V
- Keep Wi-Fi only about 7mA current
- Stand by power consumption of about 8μA
- Contains a 120MHz clock speed of STM32F2 microcontrollers, embedded 1M bytes of Flash, 128k bytes of SRAM
- 32 GPIO port
- 1 SPI / IIS interface
- 10 ADC input channels, two DAC output channels
- 1 USB OTG port, two CAN interfaces
- 1 I2C Interface
- Each GPIO port has PWM input, output, and timer input and output channels
- SWD Debug Interface
- Supports IEEE 802.11 b / g / n, Wi-Fi bands 1-13
- Transmit Power: 18dBm @ 11b, 15dBm @ 11g, 14.5dBm @ 11n
- Receiver sensitivity: -96dBm
- Data transfer rate: 11@802.11b, 54M@802.11g, 72M@802.11n
- Encryption: WEP, WPA / WPA2 PSK / Enterprise
- A variety of energy-saving mode
- Onboard PCB antenna can also be connected to an external antenna via IPEX
- Each module has been specifically tuned RF and passed CE, FCC and other international certification
- SWD debug interface
Package list
Documents
